Publication: USE OF PARTIALLY HYDROLYZED PVA FOR BORON CARBIDE SYNTHESIS FROM POLYMERIC PRECURSOR
Loading...
Date
Unit of Researcher
Authors
Advisor
item.page.editor
Editor
Department
Journal Title
Journal ISSN
Volume Title
Publisher
UNIV CHEMISTRY & TECHNOLOGY, PRAGUE
DOI
10.13168/cs.2020.0031
Type
Abstract
Boron carbide (B4C) synthesis from a polymeric precursor is an alternative to a traditional carbothermal reduction, promising low energy consumption and production costs, particularly for a polymeric precursor such as polyvinyl borate (PVBO). The sol-gel technique is preferred in the production of polymeric precursors owing to its convenience in producing single-source reactants for synthesizing B4C at low temperatures (< 1800 degrees C). The sol-gel parameters, such as the composition, viscosity, and pH, affect the formation of the polymeric precursor. In this study, industrial-grade partially hydrolyzed PVA and technical-grade boric acid (H3BO3) are used to produce PVBO. We aim to specify the viscosity and pH values for different ratios of PVA:H3BO3. A sample with a weight ratio of PVA:H3BO3 of 1:1 (PHD101) is determined to have the optimum process parameters. Calcination is performed between 500 degrees C and 700 degrees C for 1-3 h to produce a single-source reactant, which consists of boron oxide (B2O3) and carbon. It was observed that B2O3 was distributed on the nano-scale level in the carbon matrix. The reactant is heat-treated at 1400 degrees C for 5 h and crystalline, polyhedral, and irregular B4C particles are synthesized at low temperatures from industrial grade raw materials.
Description
Journal or Series
CERAMICS-SILIKATY
ISSN
0862-5468
ISBN
Rights
openAccess