Mn3O4-MnOOH nanocomposites for the adsorption-based removal of nickel ions from wastewater

Abstract

The removal of nickel from wastewater is a significant environmental concern because of its potential hazards to environment. Adsorption is known as an efficient water treatment strategy and there is a growing interest in the development of new adsorbent materials providing rapid adsorption kinetics, cost-effectiveness, and high adsorption capacity. In this study, the feasibility of Mn3O4-MnOOH nanocomposites was evaluated as the adsorbent material for the removal of nickel ions from wastewater. The nanocomposites were prepared using a modified sonochemical method and characterized by XRD analysis and SEM images. Batch adsorption experiments were carried out under different experimental conditions obtained by varying solution pH, adsorbent amount, and contact period. Under the optimum adsorption conditions, the %RE value was recorded around 80% for 10 mg/L Ni(II) ions. The adsorption characteristics were investigated with respect to adsorption isotherms and kinetics. Langmuir and Freundlich isotherm models were used to fit the adsorption data and the results indicated that adsorption of nickel ions onto nanocomposite could be complex and obey both monolayer adsorption and heterogeneous surface. Accordingly, maximum adsorption capacity of nanocomposites were calculated as 12.387 mg/g. Research works comparing the kinetic models of pseudo-first-order, pseudo-second-order, and Elovich revealed that chemical sorption plays an important role as the rate-limiting step in the adsorption of nickel ions.