Yayın:
MODELING THE DEEP DRAWING OF AN AISI 304 STAINLESS-STEEL RECTANGULAR CUP USING THE FINITE-ELEMENT METHOD AND AN EXPERIMENTAL VALIDATION

Basit öğe sayfası
dc.contributor.authorSener, Bora
dc.contributor.authorKurtaran, Hasan
dc.date.accessioned2026-06-27T13:58:54Z
dc.date.issued2016
dc.description.abstractIn this paper the deep drawing of a rectangular cup from AISI 304 stainless steel sheet was investigated numerically and experimentally. The finite-element method was used for computer modeling of the deep-drawing process. The thickness distribution predicted from the finite-element analysis was compared with experimental measurements. It was observed that the numerical results agree well with the experimental values. The minimum thickness was observed at the punch radius in both the simulation and experiment.en
dc.description.urihttps://doi.org/10.17222/mit.2015.278
dc.identifier.doi10.17222/mit.2015.278
dc.identifier.eissn1580-3414
dc.identifier.endpage965
dc.identifier.issn1580-2949
dc.identifier.issue6
dc.identifier.startpage961
dc.identifier.urihttps://hdl.handle.net/20.500.14981/56207
dc.identifier.volume50
dc.identifier.wos000391224300019
dc.language.isoeng
dc.publisherINST ZA KOVINSKE MATERIALE I IN TEHNOLOGIE
dc.relation.ispartofMATERIALI IN TEHNOLOGIJE
dc.rightsopenAccess
dc.subjectdeep drawing
dc.subjectrectangular cup
dc.subjectfinite element
dc.subjectstainless steel
dc.subjectSQUARE CUPS
dc.subjectSTEEL
dc.subjectSHEET
dc.subjectFORMABILITY
dc.subjectSIMULATION
dc.subjectDESIGN
dc.subjectMaterials Science
dc.subjectMetallurgy & Metallurgical Engineering
dc.titleMODELING THE DEEP DRAWING OF AN AISI 304 STAINLESS-STEEL RECTANGULAR CUP USING THE FINITE-ELEMENT METHOD AND AN EXPERIMENTAL VALIDATION
dc.typeArticle
dspace.entity.typePublication
local.import.sourceWOS

Dosyalar

Koleksiyonlar

Yayınlar