Yayın: Effect of boric acid doped PEDOT:PSS layer on the performance of P3HT: PCBM based organic solar cells
| dc.contributor.author | Yagci, Ozlem | |
| dc.contributor.author | Yesilkaya, Serco Serkis | |
| dc.contributor.author | Yuksel, Sureyya Aydin | |
| dc.contributor.author | Ongul, Fatih | |
| dc.contributor.author | Varal, Nurhan Mehmet | |
| dc.contributor.author | Kus, Mahmut | |
| dc.contributor.author | Gunes, Serap | |
| dc.contributor.author | Icelli, Orhan | |
| dc.contributor.institutionauthor | AYDIN YÜKSEL, Süreyya | |
| dc.contributor.institutionauthor | YAĞCİ, Özlem | |
| dc.date.accessioned | 2026-06-27T13:47:59Z | |
| dc.date.issued | 2016 | |
| dc.description.abstract | In this study, we fabricated PEDOT:PSS film with different concentrations 0-5 mg/ml of boric acid (H3BO3) doped PEDOT:PSS film as hole collector layer. Undoped and boric acid doped PEDOT:PSS films are prepared with spin coating technique and characterized by XRD, UV, AFM, FTIR and electrical conductivity measurements. We fabricated polymer solar cells in the form of ITO/PEDOT:PSS:H3BO3/P3HT:PCBM/Al. Results show that the open-circuit voltage (V-oc) and the fill factor (FF) increased by introducing H3BO3 as dopant into the PEDOT:PSS layer due to an increase in the work function of PEDOT: PSS layer and improvement of surface roughness, respectively. The solar cells without H3BO3 showed a power conversion efficiency PCE of 1.79% whereas the cells with H3BO3 concentration of 1.25 mg/ml in PEDOT:PSS, showed a higher performance resulting in a PCE of 2.14% under AM 1.5G illumination. (C) 2015 Elsevier B.V. All rights reserved. | en |
| dc.description.sponsorship | TUBITAK (The Scientific and Technological Research Council of Turkey) [113F391] | |
| dc.description.uri | https://doi.org/10.1016/j.synthmet.2015.11.010 | |
| dc.identifier.doi | 10.1016/j.synthmet.2015.11.010 | |
| dc.identifier.endpage | 18 | |
| dc.identifier.issn | 0379-6779 | |
| dc.identifier.startpage | 12 | |
| dc.identifier.uri | https://hdl.handle.net/20.500.14981/54952 | |
| dc.identifier.volume | 212 | |
| dc.identifier.wos | 000370088400002 | |
| dc.language.iso | eng | |
| dc.publisher | ELSEVIER SCIENCE SA | |
| dc.relation.ispartof | SYNTHETIC METALS | |
| dc.subject | PEDOT:PSS | |
| dc.subject | Bulk heterojunction solar cells | |
| dc.subject | Boric acid | |
| dc.subject | PHOTOVOLTAIC DEVICES | |
| dc.subject | MORPHOLOGY | |
| dc.subject | BLENDS | |
| dc.subject | FILMS | |
| dc.subject | CONDUCTIVITY | |
| dc.subject | PEDOT/PSS | |
| dc.subject | OXIDE | |
| dc.subject | SPECTROSCOPY | |
| dc.subject | EFFICIENCY | |
| dc.subject | NANOTUBES | |
| dc.subject | Materials Science | |
| dc.subject | Physics | |
| dc.subject | Polymer Science | |
| dc.title | Effect of boric acid doped PEDOT:PSS layer on the performance of P3HT: PCBM based organic solar cells | |
| dc.type | Article | |
| dspace.entity.type | Publication | |
| local.import.source | WOS |