Yayın:
Production of TiC reinforced-aluminum composites with the addition of elemental carbon

Basit öğe sayfası
dc.contributor.authorKerti, I
dc.contributor.institutionauthorKERTİ, Işıl
dc.date.accessioned2026-06-27T13:00:56Z
dc.date.issued2005
dc.description.abstractTiC reinforced Al matrix composites were produced by the additions of elemental carbon to both Al+4%Ti and Al+5%Ti alloys. It is shown that the microstructure, phase composition as well as fracture behavior of the composites produced are controlled by the processing parameters, such as temperature, amount of excess carbon and duration. Composite microstructure subjected to 1300 degrees C for 15 min includes only TiC particles where the fracture occurs in a ductile manner whilst composites subjected to 1200 degrees C for 30 min contain Al3Ti and TiC particles which show mixed mode of fracture behavior where Al3Ti particles resulted in brittle fracture due to their coarser size. (C) 2005 Elsevier B.V. All rights reserved.en
dc.description.urihttps://doi.org/10.1016/j.matlet.2005.06.032
dc.identifier.doi10.1016/j.matlet.2005.06.032
dc.identifier.endpage3800
dc.identifier.issn0167-577X
dc.identifier.issue29-30
dc.identifier.startpage3795
dc.identifier.urihttps://hdl.handle.net/20.500.14981/49003
dc.identifier.volume59
dc.identifier.wos000232864800001
dc.language.isoeng
dc.publisherELSEVIER SCIENCE BV
dc.relation.ispartofMATERIALS LETTERS
dc.subjectin situ production
dc.subjectcomposite materials
dc.subjectaluminum composites
dc.subjectTiC
dc.subjectMETAL-MATRIX COMPOSITES
dc.subjectAL-TI
dc.subjectTITANIUM
dc.subjectALLOYS
dc.subjectLIQUID
dc.subjectMaterials Science
dc.subjectPhysics
dc.titleProduction of TiC reinforced-aluminum composites with the addition of elemental carbon
dc.typeArticle
dspace.entity.typePublication
local.import.sourceWOS

Dosyalar

Koleksiyonlar

Yayınlar