Publication: Fluorescence quenching method for monitoring oxygen diffusion into PS/CNT composite films
Loading...
Date
Unit of Researcher
Authors
Advisor
item.page.editor
Editor
Department
Journal Title
Journal ISSN
Volume Title
Publisher
ELSEVIER SCIENCE SA
DOI
10.1016/j.porgcoat.2013.05.020
Type
Abstract
Oxygen permeabilities of nanocomposite films consisting of multi wall carbon nanotubes (MWNT) and polystyrene (PS) were determined to investigate the oxygen diffusion depending on MWNT and temperature. A method which is based on quenching of an excited phosphorescent by oxygen was applied for the measurements. The composite films were prepared from mixtures of (MWNT) and surfactant-free pyrene (P)-labeled (PS) latexes of various compositions at room temperature. These films were then annealed at 170 degrees C which is well above the glass transition (T-g) temperature of polystyrene, for 10 min. Diffusion experiments were performed for eight films with different MWNT content (0, 1.5, 3, 5, 10, 15, 25 and 40 wt%) to evaluate the effect of MWNT content on oxygen diffusion. Diffusion coefficients were found to increase from 1.1 x 10(-12) to 41 x 10(-12) cm(2) s(-1) with increasing MWNT content. On the other hand, to examine the effect of temperature on oxygen diffusion, diffusion measurements were performed over a temperature range of 24-70 degrees C for three different MWNT contents (3, 15, and 40 wt%) within the films. The results indicated that the values of the diffusion coefficient D are strongly dependent on both temperature and MWNT content in the film. It was also observed that the diffusion coefficients obey Arrhenius behavior, from which diffusion energies were determined, which increased with increase of MWNT content and temperature. (C) 2013 Elsevier B.V. All rights reserved.
Description
Journal or Series
PROGRESS IN ORGANIC COATINGS
ISSN
0300-9440
ISBN
Rights
Keywords
PS , MWNT , Fluorescence , Oxygen , Quenching , LATEX FILMS , POLYSTYRENE , Chemistry , Materials Science