Yayın:
EFFECT OF THE ATOMIC RADIUS OF ALLOYING ELEMENTS ON FORMATION OF STRAIN MARTENSITE IN BAINITIC DUCTILE IRON

Basit öğe sayfası
dc.contributor.authorAkca, Cem
dc.contributor.authorKinikoglu, Nihat G.
dc.date.accessioned2026-06-27T13:13:48Z
dc.date.issued2011
dc.description.abstractThe effect of the atomic radius of the alloying elements (Ni, Cu, and Mo) on the rate of formation of strain-induced martensite is investigated. Since the final aim of the study is production of railway-wheel bainitic iron, a special device simulating the operation of material in a railway wheel has been constructed. Small test pieces in the form of railway wheels with different contents of Ni, Cu, and Mo were cast and subjected to isothermal hardening at 375 degrees C for obtaining a structure of upper bainite with high amount of retained austenite, which made the observation of the transformation easier. A correlation equation relating the atomic radius of the alloying element to the rate of the martensitic transformation is suggested.en
dc.description.urihttps://doi.org/10.1007/s11041-010-9294-6
dc.identifier.doi10.1007/s11041-010-9294-6
dc.identifier.eissn1573-8973
dc.identifier.endpage423
dc.identifier.issn0026-0673
dc.identifier.issue9-10
dc.identifier.startpage420
dc.identifier.urihttps://hdl.handle.net/20.500.14981/50785
dc.identifier.volume52
dc.identifier.wos000286210600004
dc.language.isoeng
dc.publisherSPRINGER
dc.relation.ispartofMETAL SCIENCE AND HEAT TREATMENT
dc.subjectbainitic ductile cast iron
dc.subjectplastic deformation
dc.subjectmartensitic transformation
dc.subjectMetallurgy & Metallurgical Engineering
dc.titleEFFECT OF THE ATOMIC RADIUS OF ALLOYING ELEMENTS ON FORMATION OF STRAIN MARTENSITE IN BAINITIC DUCTILE IRON
dc.typeArticle
dspace.entity.typePublication
local.import.sourceWOS

Dosyalar

Koleksiyonlar

Yayınlar