Yayın:
Effect of some welding parameters on nugget size in electrical resistance spot welding

Basit öğe sayfası
dc.contributor.authorSavas, Omer
dc.contributor.institutionauthorSAVAŞ, Ömer
dc.date.accessioned2026-06-27T13:36:49Z
dc.date.issued2015
dc.description.abstractIn this study, the effects of weld parameters on nugget size and tensile-shear strength of welding joint in electrical resistance spot welding of galvanized DP 600 steel sheets having 1.2 mm were investigated. Taguchi design method has been employed to examine the effects of five parameters of welding current, electrode pressure, welding time, clamping time and holding time by using the L-27 (5(3)) orthogonal array. Results showed that the most effective parameters on tensile shear strength and the nugget size ratio (hn/dn) were found as welding current and welding time, whereas electrode pressure, clamping time and holding time were less effective factors. Max. 545 MPa strength was obtained through proposed optimum conditions by Taguchi technique.en
dc.description.urihttps://doi.org/10.12989/scs.2015.18.2.345
dc.identifier.doi10.12989/scs.2015.18.2.345
dc.identifier.eissn1598-6233
dc.identifier.endpage355
dc.identifier.issn1229-9367
dc.identifier.issue2
dc.identifier.startpage345
dc.identifier.urihttps://hdl.handle.net/20.500.14981/53731
dc.identifier.volume18
dc.identifier.wos000352361900004
dc.language.isoeng
dc.publisherTECHNO-PRESS
dc.relation.ispartofSTEEL AND COMPOSITE STRUCTURES
dc.rightsopenAccess
dc.subjectresistance spot welding
dc.subjectnugget size ratio
dc.subjecttensile shears strength
dc.subjectTaguchi method
dc.subjectMECHANICAL-PROPERTIES
dc.subjectSTEEL SHEETS
dc.subjectSTRENGTH
dc.subjectConstruction & Building Technology
dc.subjectEngineering
dc.subjectMaterials Science
dc.titleEffect of some welding parameters on nugget size in electrical resistance spot welding
dc.typeArticle
dspace.entity.typePublication
local.import.sourceWOS

Dosyalar

Koleksiyonlar

Yayınlar