Yayın:
Effect of porous coating on two-phase pressure drop of water during up-flow boiling in tubes

Basit öğe sayfası
dc.contributor.authorYidiz, Sebiha
dc.date.accessioned2026-06-27T13:07:25Z
dc.date.issued2008
dc.description.abstractThis paper focuses on the effects of porous coating on two-phase flow pressure drop during up-flow boiling of water in vertical tubes. The experiments were carried out under subcooled fluid-inlet conditions (5-73 K) for different mass fluxes (200-400 kg/m(2) S) and pressures (0.11-0.69 MPa). The measured pressure drops were compared first with each other, and then with correlations from literature. It was found that the best agreement between predicted and measured values is obtained by the method of Thom [3] for a smooth tube and by Muller-Steinhagen and Heck's method [4] for a porous coated tube respectively. (c) 2007 Elsevier Ltd. All rights reserved.en
dc.description.urihttps://doi.org/10.1016/j.icheatmasstransfer.2007.08.005
dc.identifier.doi10.1016/j.icheatmasstransfer.2007.08.005
dc.identifier.endpage337
dc.identifier.issn0735-1933
dc.identifier.issue3
dc.identifier.startpage326
dc.identifier.urihttps://hdl.handle.net/20.500.14981/50049
dc.identifier.volume35
dc.identifier.wos000253658500010
dc.language.isoeng
dc.publisherPERGAMON-ELSEVIER SCIENCE LTD
dc.relation.ispartofINTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
dc.subjectpressure drop
dc.subjecttwo-phase up-flow
dc.subjectsmooth tube
dc.subjectporous coated tube
dc.subjectwater
dc.subjectThermodynamics
dc.subjectMechanics
dc.titleEffect of porous coating on two-phase pressure drop of water during up-flow boiling in tubes
dc.typeArticle
dspace.entity.typePublication
local.import.sourceWOS

Dosyalar

Koleksiyonlar

Yayınlar