Yayın:
The combined effect of energy density and hollow microspheres additive on structural and wear properties of polyamide 11 composites produced via selective laser sintering

Basit öğe sayfası
dc.contributor.authorCingoz, Umut Can
dc.contributor.authorKisasoz, Burcin Ozbay
dc.contributor.authorKisasoz, Alptekin
dc.date.accessioned2026-06-27T14:59:16Z
dc.date.issued2025
dc.description.abstractThis study investigated the production and properties of polyamide 11 matrix hollow ceramic microsphere reinforced composites. The composites were produced at 10 wt% and 20 wt% reinforcement ratios by selective laser sintering using different energy density values. The influence of the energy density values and hollow ceramic microsphere additive on the properties of the samples was determined. The ceramic microspheres provided the production of lightweight samples. Moreover, the wear behaviour of the samples improved significantly with a combined effect of the energy density and usage of ceramic-based microsphere. The wear rate was reduced to 2.75 & sdot;10-4 mm3/Nm at 0.0500 J/mm2 energy density and 20 wt% reinforcement ratio.en
dc.description.sponsorshipYildiz Technical University Scientific Research Project [FYL-2023-6036]
dc.description.urihttps://doi.org/10.1016/j.matlet.2024.137790
dc.identifier.doi10.1016/j.matlet.2024.137790
dc.identifier.eissn1873-4979
dc.identifier.issn0167-577X
dc.identifier.urihttps://hdl.handle.net/20.500.14981/66803
dc.identifier.volume381
dc.identifier.wos001370583700001
dc.language.isoeng
dc.publisherELSEVIER
dc.relation.ispartofMATERIALS LETTERS
dc.rightsopenAccess
dc.subjectAdditive manufacturing
dc.subjectPolymer
dc.subjectComposite
dc.subjectWear
dc.subjectMaterials Science
dc.subjectPhysics
dc.titleThe combined effect of energy density and hollow microspheres additive on structural and wear properties of polyamide 11 composites produced via selective laser sintering
dc.typeArticle
dspace.entity.typePublication
local.import.sourceWOS

Dosyalar

Koleksiyonlar

Yayınlar