Yayın:
Fabrication and Characterization of SiC Preforms for Metal Matrix Composites

Basit öğe sayfası
dc.contributor.authorKisasoz, Alptekin
dc.contributor.authorGuler, Kerem Altug
dc.contributor.authorKaraaslan, Ahmet
dc.contributor.institutionauthorGÜLER, Kerem Altuğ
dc.contributor.institutionauthorKISASÖZ, Alptekin
dc.date.accessioned2026-06-27T13:13:24Z
dc.date.issued2011
dc.description.abstractIn this study, the effect of the PVA amount on the SiC preform properties was investigated. SIC particulates that have 60 mu m average grain size were used as preform constituent. In order to produce SiC preforms, slurries that contains SIC, PVA, and colloidal silica were prepared with different amount of PVA and were dried at room temperature for 24 hours. Dried specimens were sintered at 1000 degrees C for 3 hours. Also, specimens were characterized by Archimedes' tests for porosity. Mechanical and microstructural tests were carried out by bending and SEM analysis, respectively.en
dc.description.sponsorshipBCACT-Balkan Center for Advanced Casting Technologies
dc.description.urihttps://doi.org/10.3139/120.110202
dc.identifier.doi10.3139/120.110202
dc.identifier.endpage57
dc.identifier.issn0025-5300
dc.identifier.issue1-2
dc.identifier.startpage54
dc.identifier.urihttps://hdl.handle.net/20.500.14981/50705
dc.identifier.volume53
dc.identifier.wos000288353600009
dc.language.isoeng
dc.publisherCARL HANSER VERLAG
dc.relation.ispartofMATERIALS TESTING
dc.subjectINFILTRATION
dc.subjectMaterials Science
dc.titleFabrication and Characterization of SiC Preforms for Metal Matrix Composites
dc.typeArticle
dspace.entity.typePublication
local.import.sourceWOS

Dosyalar

Koleksiyonlar

Yayınlar