Yayın:
Properties of Si3N4/SiC composites produced via spark plasma sintering

Basit öğe sayfası
dc.contributor.authorTaslicukur, Zeynep
dc.contributor.authorSahin, Filiz Cinar
dc.contributor.authorKuskonmaz, Nilgun
dc.date.accessioned2026-06-27T13:22:50Z
dc.date.issued2012
dc.description.abstractSi3N4 ceramics reinforced with SiC particles were fabricated via spark plasma sintering at 1 650 degrees C under 40 MPa pressure. AlN and Y2O3 were used as sintering additives. The purpose of this work was to study the influence of SiC powders on the properties of Si3N4/SiC composites. The microstructure, phase composition, and mechanical properties of the composites were investigated. It was found that mechanical properties of the composites improved, the a alpha-beta transformation and grain growth of beta-Si3N4 were inhibited and the equiaxed grain increased due to the increase of SiC(w).en
dc.description.sponsorshipScientific Research Foundation of Yildiz Technical University
dc.description.urihttps://doi.org/10.3139/146.110779
dc.identifier.doi10.3139/146.110779
dc.identifier.eissn2195-8556
dc.identifier.endpage1339
dc.identifier.issn1862-5282
dc.identifier.issue11
dc.identifier.startpage1337
dc.identifier.urihttps://hdl.handle.net/20.500.14981/52409
dc.identifier.volume103
dc.identifier.wos000311973100009
dc.language.isoeng
dc.publisherCARL HANSER VERLAG
dc.relation.ispartofINTERNATIONAL JOURNAL OF MATERIALS RESEARCH
dc.subjectSi3N4
dc.subjectSiC
dc.subjectSpark plasma sintering
dc.subjectMechanical properties
dc.subjectMECHANICAL-PROPERTIES
dc.subjectMICROSTRUCTURE
dc.subjectCERAMICS
dc.subjectFABRICATION
dc.subjectMetallurgy & Metallurgical Engineering
dc.titleProperties of Si3N4/SiC composites produced via spark plasma sintering
dc.typeArticle
dspace.entity.typePublication
local.import.sourceWOS

Dosyalar

Koleksiyonlar

Yayınlar